Nr Order Number Specifications
71389514 Extension Wire TC IEC 2x type S/R
L=180mm, 3 pieces
71389517 extension lead 2x type B
L=180mm, 3 pieces
Terminal head only on request
71244062 ferrule thread
71421272 Compression fitting G1" 15.5.mm, 316Ti
71182602 seal
5x O-ring 3.69x 1.78
5x 0-ring 74.7x2.75
71044061 Equipment Package
2x screws, 2x springs, 2x spring rings
1x sealing CDI-connector
B TMT181- module temperature transmitter TMT181
Temperature transmitter,PC-programmable.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, galvanic isolation.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.
Approval:
A Non-hazardous area
Configuration Connection:
1 Thermocouple TC
Configuration Sensor Type:
B Type B, 40... 1820oC, min. span500K
R Type R, -50...1768oC, min. span500K
S Type S, -50...1768oC, min. span500K
Y Special version, TSP-no. to be spec.
Configuration:
B Measuring range, see additional spec.
Additional Option:
A Standard - DIN mounting set
B TMT84- module temperature transmitter TMT84
Dual sensor input.
Advanced diagnostics: sensor monitoring.
Galvanic isolation 2kV.
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
Factory setup:
CH1: Pt100, 3-wire, oC
CH2: inactive
Differing configuration optional
selectable.
Approval:
A1 Non-hazardous area
Output Signal:
A PROFIBUS PA
Electrical Connection:
1 Spring terminals, housing form B, DIN EN 50446
2 Screw terminals, housing form B, DIN EN 50446
Field Housing:
A W/o, mounting set DIN standard
>Configuration Input:
D1 Ch1: TC, Ch2: inactive
D2 Ch1: TC, Ch2: TC
B TMT85- module temperature transmitter TMT85
Temperature transmitter with dual
sensor input and advanced diagnostics
for sensor monitoring.
FOUNDATION Fieldbus protocol (ITK 5.0).
Galvanic isolation 2 kV
(sensor input to the output).
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
UL listed, CSA General Purpose.
Approval:
A1 Non-hazardous area
Output Signal:
A FOUNDATION Fieldbus H1
Electrical Connection:
1 Spring terminals, housing form B, DIN EN 50446
2 Screw terminals, housing form B, DIN EN 50446
Field Housing:
A W/o, mounting set DIN standard
>Configuration Input:
D1 Ch1: TC, Ch2: inactive
D2 Ch1: TC, Ch2: TC
FXA195- communication interface FXA195
Modem to connect HART field devices
to a computer via USB. Commissioning
field devices with software tool.
:: To connect to a intrinsically safe
signal circuit.
:: SIL2, IEC61508.
Approval:
G ATEX II (1)GD [EEx ia] IIC
Additional Option:
1 Basic version
TXU10- Instrument debugging package TXU10
for devices that can be PC-programmed and debugged
The program sets the connection line for a PC with USB interface
Version:
AA 4 pin plug ReadWin2000
READWIN- Readwin 2000 Debug Package READWIN
Readwin 2000 Operation Read. software
Memory Medium:
1 CD
Software:
AA E H
B TMT182- module temperature transmitter TMT182
Temperature transmitter, Protocol HART.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, SIL2, galvanic isolation
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN43729.
UL listed.
GL (German Llyod) Marine.
Approval:
A Non-hazardous area
Configuration Connection:
C Thermocouple TC, non-SIL
Configuration Sensor Type:
B Type B, 40... 1820oC, min. span500K
R Type R, -50...1768oC, min. span500K
S Type S, -50...1768oC, min. span500K
Y Special version, TSP-no. to be spec.
Configuration:
B Measuring range, see additional spec.
Additional Option:
A Standard - DIN mounting set
B TMT82- module temperature transmitter TMT82
2-wire temperature transmitter.
Dual universal sensor input.
Galvanic isolation 2kV (input/output).
Application: RTD, TC, Ohm and mV.
::Highly reliable due to drift
detection and sensor back up.
::Optional also for safety critical applications
by means of SIL 2/3 acc. to IEC61508.
Approval:
AA Non-hazardous area
Communication; Output Signal:
A HART; 1x 4-20 mA
Electrical Connection:
1 Spring terminals, housing form B, DIN EN 50446
2 Screw terminals, housing form B, DIN EN 50446
Field Housing:
A W/o, mounting set DIN standard
Configuration Universal Input:
D1 Ch1: TC, Ch2: inactive
D2 Ch1: TC, Ch2: TC
Sensor Type Input 1:
TB Type B, 40...1820oC, min. span 500K IEC 584
TR Type R, -50...1768oC, min. span 500K IEC 584
TS Type S, -50...1768oC, min. span 500K IEC 584
Sensor Type Input 2:
AA Inactive
TB Type B, IEC 584
TR Type R, IEC 584
TS Type S, IEC 584
Input; Interconnection:
A1 PV = CH1; CH2 inactive
A2 PV = CH1; SV = CH2
>>Additional Approval:
LA SIL conformity