CCS24X | 71076922The correct use and precautions of the sealing ring, covering membrane and electrolyte of the E H dissolved oxygen maintenance kit are as follows
Correct use:
1. Install the sealing ring: Before installing the maintenance package, install the sealing ring first. Make sure that the sealing ring is placed flat on the corresponding position, and make sure that it fits tightly with the cover or interface of the maintenance kit.
2. Open and maintain the package: Follow the instructions or instructions provided by the manufacturer to properly open and maintain the cover of the package. When opening, care should be taken to avoid damaging the sealing ring or cover.
3. Electrolyte injection: If electrolyte needs to be added, appropriate tools or materials should be used to correctly inject electrolyte in accordance with the guidelines or instructions provided by the manufacturer. Be careful not to let the electrolyte overflow, so as not to dirty the maintenance package or cause other problems
4. Look at the cover film installation: according to the guidelines or instructions provided by the manufacturer, the correct installation of the cover film. Ensure that the cover film is placed flat on the inside of the maintenance package and is tightly attached to the cell interface.
5. Initial calibration: Before the first use or replacement of the sealing ring, covering membrane or electrolyte, calibration operation is carried out to ensure the accuracy of the measurement. Follow the calibration steps provided by the manufacturer.
6. Daily use: Ensure that the maintenance package is not subject to vibration or impact during use, so as not to affect the measurement accuracy and the service life of the maintenance package. At the same time, keep the surrounding environment clean, avoid dust, impurities and other interference on the measurement.
Note:
1. Professional operation: For more complex maintenance operations or troubleshooting, it is recommended to operate by professionals or seek technical support from manufacturers to ensure the normal operation and use of equipment
2. Storage and storage: unused maintenance kits should be stored in a dry, cool place, avoid direct sunlight and high temperature environment. At the same time, the maintenance package should be maintained.
neat and intact to avoid damage or contamination.
3. Prevent impurities and pollutants: When cleaning and maintaining the package, pay special attention to prevent impurities and pollutants from entering the electrolytic cell or damaging the sealing ring, so as not to affect the measurement accuracy and equipment performance.
4. Keep the equipment dry: Before replacing the sealing ring, looking at the cover film or electrolyte, ensure that the equipment is completely dry, so as not to affect the measurement effect and service life. 5. Preventive measures: Before any maintenance operation, take appropriate preventive measures, such as Turn off the power supply, disconnect the power cord, etc., to ensure the safety of operation.
6. Appropriate tools and materials: Use appropriate tools and materials for maintenance operations to ensure the effectiveness and safety of operations. Do not use inappropriate tools or materials to avoid unnecessary damage or problems
7. Follow the operating procedures: Before performing any maintenance operations, be sure to carefully read and follow the operating procedures and safety warnings provided by the equipment manufacturer to prevent accidents or damage to the equipment
8. Record and track: It is recommended to record and track the time, reason and replacement personnel of each replacement of sealing ring, cover film or electrolyte, so as to facilitate maintenance and management.
Following the above proper usage and precautions helps ensure proper operation and accurate measurement of the CCS24X E H DO Maintenance Kit. If you have any questions or encounter problems, it is recommended to consult professionals or technical personnel of the manufacturer in time.
a large number of in stock
welcome to buy
