1.65I. Refer to the voltage given on the instrument nameplate for wiring. As shown in the figure below, 1 is connected to the positive power supply and 2 is connected to the negative power supply.
2.the MASS FOLW (mass flow rate) VOLUME FLOW (volume flow rate) TEMPERATURE (temperature value) can be queried in the MEASURING VALUES.
3.SYSTEM UNITS can modify the units of mass flow rate, volume flow rate, temperature, density, pressure and length. Enter the correct password before modification.
4.in the OPERATION, the user can modify the language as needed.
5.in TOTALIZER1,2. The cumulants can be found. Sets whether cumulative 1 or 2 is mass flow or volume flow.
6.can see the current output (4-20)mA, the modified time constant and the upper limit of the flow rate in the CURRENTOUTPUT, and the user can change the parameters according to the requirements.
7. Check the pulse and frequency of the flowmeter in this interface.
8.SENSOR DATA can choose whether it is a round tube or a rectangular tube, choose different shapes, and the values set inside are also different.
