E H Dissolved Oxygen Maintenance Kit The correct standard measurement method is as follows:
1. Prepare tools and materials: COV45-41TN1 | COV45-10N2/0 E H Dissolved oxygen maintenance kit, electrolyte, O-ring, polishing paper, etc. 2. Install electrolyte: Open the maintenance kit, take out 10 bottles of electrolyte, and install them correctly according to the instructions on the electrode 3. Install O-ring: Take out 3 O-ring and install them on the appropriate position on the electrode
4. Prepare for measurement: insert the electrode into the solution to be tested to ensure that the electrolyte is in full contact with the solution
5. Start the measurement: Press the measurement button on the electrode, and wait for the measurement result to be read after stabilization. The precautions are as follows:
1. Ensure the cleanliness of the electrolyte and avoid the generation of impurities and bubbles.
2. Follow the instructions for the use of the electrode and perform the measurement correctly
3. Regularly check whether the reading of the electrode is accurate, and deal with any abnormality in time.
4. Follow the electrode cleaning and maintenance instructions, regularly clean the electrode surface, replace the electrolyte, etc.
COV45-41TN1 | COV45-10N2/0 E H Dissolved Oxygen Cover Membrane Maintenance Kit is an important accessory used to maintain the dissolved oxygen sensor. It is mainly used to cover and protect the diaphragm of the sensor to ensure the normal operation of the sensor. The following are its usage scenarios and precautions:
Use Scenario:
1. Online monitoring of water quality, control of sewage treatment process, etc.
2. Where continuous monitoring of dissolved oxygen is required, such as water quality monitoring in industrial processes, laboratory studies, etc.
3. In the field or on-site monitoring, the diaphragm needs to be quickly replaced for maintenance.
Precautions
1. Before use, you should read the product manual carefully to understand the correct use method and precautions
2. Ensure that hands and tools are clean, to avoid oil or other impurities contaminated diaphragm
3. The diaphragm should be stored in a dry, cool place, avoid direct sunlight and high temperature
4. Be careful when installing the diaphragm to avoid scratches or tears, and ensure that the installation is correct and closely fits the sensor
5. regularly check whether the diaphragm is in good condition, if there is damage or pollution should be replaced immediately.
6. During use, avoid excessive stretching or twisting of the diaphragm, so as not to affect its normal function
7. If the sensor reading is abnormal or the error is large, check whether the diaphragm is intact and take corresponding measures to solve the problem,
The above are the measurement methods and precautions for the correct standard of COV45-41TN1 | COV45-10N2/0 E H dissolved oxygen maintenance package. please refer to the product manual or consult professional and technical personnel
a large number of in stock
welcome to buy
