TR13
             
订货号 描述 推荐 Tk 位置 有效
71249291 导热油 FDA认证 30g   A   没有被分类的  
71312729 导热油 HSC 340, 100g   A   没有被分类的  
71367427 垫片 Packing unit: 10 pieces   S   没有被分类的  
71111513 陶瓷接线端   A C 终端模块  
71111514 陶瓷接线端   A C 终端模块  
71111515 陶瓷接线端   A C 终端模块  
52028179 垫圈 Profile gasket for coverStainless steel housing F15   S   没有被分类的  
60017971 显示屏 Display LC for TA20J   S   没有被分类的  
71043745 大气补偿过滤口 Consists of:filter plug plastic,Pressure compensation filter, O-ring.Usage: housing F15.Non Ex.   S   没有被分类的  
71044061 设备包 2x screws, 2x springs, 2x spring rings,1x sealing CDI-connector   S   没有被分类的  
71313382 连接器   S   没有被分类的  
71142762 O型圈   S   没有被分类的  
TS111- iTHERM TS111 芯子 Replaceable.Metric version according DIN43735. + S A 传感器  
TPR100- 热电阻芯 TPR100 Mineral insulated cable (MgO)Replaceable insert acc.EN60751.max. measuring range: -200...600 oC(depending on configuration) + S A 传感器  
TA730- 保保护套管 TA730 In PTFE, PVDF, Tantalum or Titanium forthermowells **TW13, TR13 and TC13according to DIN Form F.Formula for calculating the totallength:Titanium or Tantalum:TL = U + 3mm (0.12in)PTFE:TL = U + 15mm (0.6in)PVDF:TL = U + 18mm (0.71in)   S F 组装/铠装配件  
TW13- **保护套管 TW13 with flange connection.Protection tube acc. DIN 43772 /2F+3Fwelded version.   S E 组装/铠装  
TR88- **热电阻 TR88 to screw-in.Neck DIN43772.Replaceable insert, MgO.max. measuring range: -200...600 oC(depending on configuration)   S   没有被分类的  
TA20A- **接线盒 TA20A Product being phased out,limited availability.Connection head to mount a measuringinsert with head transmitter or aconnection socket. To be mounted on anarmature or protective sleeve.Material: Aluminium epoxy resin coatingArea temperature : max. +100 oC;ATEX: +95 oC.   S D 外壳/外壳附件  
TA20B- 接线盒 TA20B Connecting head to mount a measuringinsert with head transmitter or aconnection socket. To be mounted on anarmature or protective sleeve.Material:Polyamid blackAmbient temperature: max. +80 oCProtection: IP65   S D 外壳/外壳附件  
TA20D- **接线盒 TA20D Product Phased Out.Connection head to mount a measuringinsert with up to two head transmittersor a connection socket and one headtransmitter. For mounting on  armatureor protection sleeve.Material: Aluminium, varnishedAmbient temperature: max. +100 oC;ATEX: +95 oC. Protection: IP66   S D 外壳/外壳附件  
TA20R- **接线盒 TA20R Stainless steel AISI 316LW 1.4404. Max temperature 100 oC,ATEX: +95 oC. Protection class IP66/IP67   S D 外壳/外壳附件  
TA20W- **接线盒 TA20W Product Phased Out.Connection head hinged to mount ameasuring insert with head transmitteror connection socket. To be mounted onan armature or a protection sleeve.Material:            AluminiumArea temperature:    max. +100 oC;ATEX:                +95 oCProtection:          IP66   S D 外壳/外壳附件  
TA21E- 接线盒 TA21E Retainer for terminal block or headtransmitter.Cover: srewable.Material: Aluminum.Max. temp.: +100 oC; ATEX +95 oC.Protection: IP65.   S D 外壳/外壳附件  
TMT84- 模块温度变送器 TMT84 Dual sensor input.Advanced diagnostics: sensor monitoring.Galvanic isolation 2kV.Application: RTC, TC, Ohm, mV.Current consumption: 11 mA.Mounting: head form B, DIN43729.Factory setup:CH1: Pt100, 3-wire, oCCH2: inactiveDiffering configuration optionalselectable. + S B 电子的(传感器)  
TMT85- 模块温度变送器 TMT85 Temperature transmitter with dualsensor input and advanced diagnosticsfor sensor monitoring.FOUNDATION Fieldbus protocol (ITK 5.0).Galvanic isolation 2 kV(sensor input to the output).Application: RTC, TC, Ohm, mV.Current consumption: 11 mA.Mounting: head form B, DIN43729.UL listed, CSA General Purpose. + S B 电子的(传感器)  
TID10- 温度变送器显示器TID10 to plug on.Dot-Matrix measured value display.12 DIP-switches buttom side.Settings:FF: Simulation, Write Lock.PA: Bus address, Write Lock.Compatible: TMT85, TMT84. + S B 电子的(传感器)  
READWIN- Readwin 2000调试包 READWIN Readwin 2000 Operation + Read. software   T   没有被分类的  
TXU10- 仪表调试包 TXU10 用于可以PC编程调试的设备程序设置+用于带USB接口的PC的连接线 + A   没有被分类的  
FXA195- 通讯接口 FXA195 Modem to connect HART field devicesto a computer via USB. Commissioning offield devices with software tool.:: To connect to a intrinsically safesignal circuit.:: SIL2, IEC61508.   T   没有被分类的  
TA30A- 接线头 TA30A Retainer for terminal block or headtransmitter + optional display.Cover: low, hinged, optional window.Material: aluminium.Coating: polyester powder-coating.Colour: body blue, cover grey.Ambient temp.: -50...150 oC (housing).Protection: IP66/68, NEMA 4X (housing).   S D 外壳/外壳附件  
TA30D- 接线头  TA30D Retainer for 2 head transmitters orterminal blocks.Cover: high, hinged.Material: aluminium.Coating: polyester powder-coating.Colour: body blue, cover grey.Ambient temp.: -50...150 oC (housing).Protection: IP66/68, NEMA 4X (housing).   S D 外壳/外壳附件  
TA30P- 接线盒 TA30P Retainer for 2 head transmitters orterminal blocks.Cover: high, hinged.Material: Polyamid PA12 antistatic.Colour: black.Ambient temp.: -40...120oC (housing).Protection: IP65 (housing).   S D 外壳/外壳附件  
TMT180- 模块温度变送器 TMT180 Temperature transmitter,PC-programable.Application: RTD.2-wire 4-20mA.Fault reaction: NAMUR NE 43.Mounting: head form B, DIN EN50446.UL listed. + S B 电子的(传感器)  
TMT181- **模块温度变送器 TMT181 Product being phased out,limited availability.Temperature transmitter,PC-programmable.Application: RTD, TC, Ohm, mV.2-wire 4-20mA, galvanic isolation.Fault reaction: NAMUR NE 43.Mounting: head form B, DIN EN50446.UL listed. + S B 电子的(传感器)  
TMT182- **模块温度变送器 TMT182 Temperature transmitter, Protocol HART.Application: RTD, TC, Ohm, mV.2-wire 4-20mA, SIL2, galvanic isolationFault reaction: NAMUR NE 43.Mounting: head form B, DIN43729.UL listed.GL (German Llyod) Marine. + S B 电子的(传感器)  
TMT82- 模块温度变送器 TMT82 2-wire temperature transmitter.Dual universal sensor input.Galvanic isolation 2kV (input/output).Application: RTD, TC, Ohm and mV.::Highly reliable due to driftdetection and sensor back up.::Optional also for safety criticalapplications by means of SIL 2/3acc. to IEC61508. + S B 电子的(传感器)  
DIENST- 服务   A   没有被分类的  
TR13- **热电阻 TR13 with flange connection.Thermowell acc. DIN43772/2F+3F.Replaceable insert, MgO.max. measuring range: -200...600 oC.(depending on configuration).   S   没有被分类的  
XPRFID- RFID TAG as spare part available onlyfor instruments with option TZD, marking RFID TAG Spare RFID TAG Consists of:RFID TAG, fixing wire, crimp sleeve.   S   没有被分类的