| Nr | 订货号 | 规格 | |
| 71044061 | 设备包
2x screws, 2x springs, 2x spring rings,
1x sealing CDI-connector |
||
| 71367414 | 铜密封圈
Packing unit: 10 pieces
|
||
| 71367420 | 铜密封圈
Packing unit: 10 pieces
|
||
| 71367424 | 铜密封圈
Packing unit: 10 pieces
|
||
| 71367425 | 铜密封圈
Packing unit: 10 pieces
|
||
| 71367427 | 垫片
Packing unit: 10 pieces
|
||
| D | TA20A- | **Terminal Head TA20A
Product being phased out,
limited availability. Connection head to mount a measuring insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material: Aluminium epoxy resin coating Area temperature : max. +100 oC; ATEX: +95 oC. |
|
| D | TA20B- | Terminal Head TA20B
Connecting head to mount a measuring
insert with head transmitter or a connection socket. To be mounted on an armature or protective sleeve. Material:Polyamid black. Ambient temperature: max. +80 oC. Protection: IP65. |
|
| FXA195- | Commubox FXA195
Modem to connect HART field devices
to a computer via USB. Commissioning of field devices with software tool. :: To connect to a intrinsically safe signal circuit. :: SIL2, IEC61508. |
||
| READWIN- | Readwin 2000 Operation + Read. software | ||
| B | TMT180- | iTEMP TMT180, Head Transmitter Pt100
Temperature transmitter,PC-programable.
Application: RTD. 2-wire 4-20mA. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. |
|
| B | TMT181- | **iTEMP TMT181, Head Transmitter PCP
Product being phased out,
limited availability. Temperature transmitter,PC-programmable. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, galvanic isolation. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. |
|
| TXU10- | Configuration Kit TXU10
for PC-programmable devices.
set-up programme+interface cable for PC with USB-Port. |
||
| B | TMT84- | iTEMP TMT84, Transmitter PA
Dual sensor input.
Advanced diagnostics:sensor monitoring. PROFIBUS PA Profile 3.02. Galvanic isolation 2kV. Application: RTD, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN EN50446. Factory setup: CH1: Pt100, 3-wire, oC. CH2: inactive. Differing configuration optional selectable. |
|
| B | TMT85- | iTEMP TMT85, Transmitter FF
Dual sensor input.
Advanced diagnostics: sensor monitoring. FOUNDATION Fieldbus protocol Galvanic isolation 2 kV. Application: RTC, TC, Ohm, mV. Current consumption: 11 mA. Mounting: head form B, DIN EN50446. Factory setup: CH1: Pt100, 3-wire, oC. CH2: inactive. Differing configuration optional selectable. |
|
| B | TID10- | Display Unit Head Transmitter
to plug on.
Dot-Matrix measured value display. 12 DIP-switches buttom side. Settings: FF: Simulation, Write Lock. PA: Bus address, Write Lock. Compatible: TMT85, TMT84, TMT82, TMT71, TMT72. |
|
| D | TA30A- | Terminal Head TA30A
Retainer for terminal block or head
transmitter + optional display. Cover: low, hinged, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). |
|
| D | TA30D- | Terminal Head TA30D
Retainer for 2 head transmitters or
terminal blocks. Cover: high, hinged. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). |
|
| B | TMT182- | **iTEMP TMT182, Head Transmitter HART
Product being phased out,
limited availability. Temperature transmitter, Protocol HART. Application: RTD, TC, Ohm, mV. 2-wire 4-20mA, galvanicisolation. Fault reaction: NAMUR NE 43. Mounting: head form B, DIN EN50446. UL listed. |
|
| B | TMT82- | iTEMP TMT82, Transmitter HART
2-wire temperature transmitter.
Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. ::Highly reliable due to drift detection and sensor back up. ::Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508. |
|